Turning and milling complex workpieces on the same machine tool and performing various processing operations can increase production, reduce labor and improve accuracy. Hass st-20y-v has a 4 "Y-axis travel (deviation from the center line ± 2"), which can be used for eccentric milling, drilling and tapping. It is equipped with a high torque power knife and a servo driven c-axis as standard, with a 4-axis machining ability.

Vf-2ss-v high speed vertical machining center

Vf-2ss-v high-speed vertical machining center, with 30 "x 16" x 20 "(762 x 406 x 508 mm) processing stroke, equipped with 40 taper 30 HP (22.4 kW) vector drive spindle, the speed of coaxial direct drive spindle can reach 12000 rpm. Other configurations include 24 bit high-speed side mounted magazine, 1400 IPM (35.6 M / min) fast moving speed, power-off protection device, 1 GB program memory, 15 "color LCD, USB interface, memory lock switch, rigid tapping, 55 gallon (208 liter) filling and cooling system.

Hass vf-2ss-v has added several popular high-performance options to the popular vertical machining center Vf-2SS, such as the fourth axis drive system and wiring, screw chip conveyor, coordinate rotation and scaling, high-speed machining with pre reading function, user-defined macro program, WiFi connection.

St-20y-v turning center

Turning and milling complex workpieces on the same machine tool and performing various processing operations can increase production, reduce labor and improve accuracy. Hass st-20y-v has a 4 "Y-axis travel (deviation from the center line ± 2"), which can be used for eccentric milling, drilling and tapping. It is equipped with a high torque power knife and a servo driven c-axis as standard, with a 4-axis machining ability.

The st-20y-v has a maximum machining capacity of 12 "x 21" (305 x 533 mm) and is equipped with a 20 hp spindle with a rotational speed of 4000 rpm and a torque of 150 ft lb. The 12 bit BOT / VDI Hybrid Turret is equipped as standard, and the z-axis fast moving speed is 945 IPM. Several popular high-performance options are added, including crawler chip conveyor, programmable hydraulic tailstock, power-off protection system, Haas intuitive programming system and user-defined macro program.

Umc-750 omnipotent 5-axis vertical machining center

5-axis machining can effectively reduce the number of clamping and improve the accuracy when machining multi-faceted or complex workpiece. Umc-750 is the most economical and practical tool for 3 + 2 processing and 5-axis linkage.

Hass umc-750 omnipotent 5-axis vertical machining center, with a processing stroke of 30 "x 20" x 20 "(762 x 508 x 508 mm), equipped with an integrated double axis turntable with ears. All models of the whole series adopt high-performance coaxial direct drive spindle, and standard configuration is 40 + 1 tool position side hanging type tool magazine.

The standard two axis turntable with ear can locate the workpiece at almost any angle, which is convenient for 5-face (3 + 2) machining, or 5-axis linkage required for contour milling and complex machining. The angle range of the turntable with ears is + 110 to - 35 degrees, and it can realize 360 degree rotation, which provides sufficient tool avoidance space and the ability to process large-scale parts. The turntable is 500 mm in size, with a T-slot and an accurate guide hole for free installation of the fixture.

Various high-efficiency options are available for umc-750 models, including crawler type chip conveyor, high-pressure spindle internal cooling system, programmable coolant nozzle, extended memory, etc.

If you are looking for an economical and practical 5-axis machine to reduce clamping times and improve accuracy, Hass umc-750 machining center is your best choice.